7
85876 & 85877 RevA
TURFCO T3100 APPLICATOR
Description
The Turfco T3100 Applicator is an easy to operate,
comfortable, high production lawn applicator for dry
and spray products. The lawn applicator is capable
of spreading fertilizer or spraying at the rate of 4000
square feet per minute (371 square meters per
minute). The T3100 Applicator is a 4 wheel machine
using standard automotive style steering for directional
control and operator comfort. The front wheels are
the steering wheels and the rear wheels are the drive
wheels.
Welcome
Welcome to the Turfco T3100 Series Applicator. This manual will describe the machine, give correct
operating procedures, and help you learn and understand correct operation. Operation of this
machine without training can result in injury to the operator or damage to the machine.
The operators position is standing on a vibration
isolated platform on the rear of the machine. The
forward and reverse speeds are controlled by using a
simple directional hand control allowing the operator
total control of the speeds from 0 to 5 MPH (0 to 8.04
Km/h). Braking is provided by a dynamic braking
system within the hydrostatic transmission and a hand
operated parking brake. Releasing the speed control
(and the foot operated forward speed control pedal)
will stop the machine. The machine is designed so
that it will stop movement if the operator dismounts
and releases the speed control.
DESCRIPTION
The Turfco T3100™ Applicator is a self-powered ride-on spreader/sprayer. The T3100 is intended to
be used for the application of properly prepared turf care liquid spray products and turf care granular
products. The T3100 is NOT intended to be used for any purpose other than the application of properly
prepared turf care products to the turf. Operation is intended to be at properly prepared worksites only.
Intended Use
Product Number 85876 - T3100 Series Applicator
Product Number 85877 - T3100 Series Applicator with Factory Installed Electric Start Kit
DS85876-01RevA
SPREADER
HOPPER
SPRAY
NOZZLES
OPERATOR
CONTROLS
OPERATOR
POSITION AND
PLATFORM
FIGURE 1
To Next Page
Loading...
Need help?
General
