8
85876 & 85877 RevA
TURFCO T3100 APPLICATOR
OPERATION
Before Operating the T3100 Series Applicator and Before Starting the Engine,
1. Read the Operators Manual and Watch the Operation CD.
2. Check the oil in the engine.
3.Checkairpressureinthefrontandreartires.InatetoPSIshownontire.
3. Fill the machine with fresh approved gasoline.
4. Inspect the machine for any loose nuts, bolts or hardware or anything that does not look normal.
5. Check all guards and covers to make sure they are secure.
6. Become familiar with the controls. Stand on the operators platform and test operate all the driving
controls. Check that the platform locking knob is in place (locked).
7. Do not start the engine - you are not ready yet.
WARNING
Warning: Driving the T3100
Applicator without training and
practice can cause damage to the
machine and injure the operator.
OPERATION
It may take several hours
of practice before one
has the skill level required
to properly applicate a
lawn. Operation of the
T3100 Applicator before
one has developed the
proper skill level can
cause damage to the
machine, operator or the
lawn.
FREEWHEEL
LEVER
PARKING
BRAKE
LEVER
ENGINE
CONTROL
WHEEL
FORWARD
SPEED
CONTROL
PEDAL
SPEED CONTROL
OP85876-02RevA
OPTIONAL
ELECTRIC
START
OPERATOR PLATFORM AND
PLATFORM LOCKING KNOB
Turfco T3100 Applicator Operator Driving Controls (See Figure 2)
Before driving the applicator become familiar with the operator controls.
A. PARKING BRAKE LEVER
B. FREEWHEEL LEVER
C. ENGINE THROTTLE CONTROL
D. FORWARD/REVERSE SPEED CONTROL
E. FORWARD SPEED CONTROL PEDAL
F. STEERING WHEEL
G. OPTIONAL ELECTRIC START
Take time to become
familiar with all the
controls before you
attempt to drive this
machine.
Become comfortable
with the reach and
movement of the Speed
controls, the Steering
Wheel and the locations
of the Engine Throttle,
Freewheel Lever, and
Parking Brake.
To Next Page
Loading...
Need help?
General
