What to do if all Tuta S30 functions are disabled but the indicator is working?
If all functions are disabled while the indicator is working, it may be due to the Caller ID presentation not being active or insufficient funds on the SIM card. To resolve this, contact your network provider to activate the SIM card function and ensure the card has sufficient balance.
What to do if the Tuta Remote Control socket doesn’t respond to any operation?
If the socket doesn’t respond to any operation, it might be working abnormally. Try switching off the power, checking the SIM card, or resetting to the factory settings.
Why does the GSM indicator light keep flashing on my Tuta S30 socket?
The GSM indicator light may keep flashing after powering on the socket because of a weak network signal or a busy network. If your mobile phone's signal is also weak, try placing the socket in a location with a stronger signal and try again.
How to fix the 'The master number already exists' error on Tuta S30 Remote Control?
This error message indicates that another master number has already been set in the socket. You can either change the master number or restore the device to its factory default settings.
What to do if the Tuta S30 Remote Control socket output cannot be changed by the M button?
If the socket output cannot be changed using the M button, it might be due to no power input or the power switch being off. Check if the TUTA S30's external AC power is available and ensure the socket is powered on.
Why does the GSM indicator light turn off on my Tuta S30 Remote Control?
The GSM indicator light might turn off because the SIM card cannot be found or identified, or the power switch is OFF. Ensure the SIM card is properly installed by powering off the socket and checking it again, then power the socket back on.
Why does the power indicator light turn off on my Tuta S30?
The power indicator light turns off because there is no power input. Check if the TUTA S30’s external AC power is available.
What to do if Tuta S30 Remote Control says 'No authorization user'?
To resolve this, use the Master mobile phone to try the command again.
Details the primary functions and capabilities of the TUTA S30 GSM power socket.
Step-by-step guide for installing the SIM card and temperature sensor in the socket.
Instructions on how to power the TUTA S30 GSM power socket on and off.
Procedure for adding the primary authorized user number to the socket.
Explains the methods for switching the socket's power output on and off.
Covers defining Master and Family users for controlling the socket's functions.
General| Brand | Tuta |
|---|---|
| Model | S30 |
| Category | Remote Control |
| Language | English |
To Next Page