Tuta S30 - 3.6 Auto-control the socket output by temperature

TUTA S30 GSM POWER SOCKET USER MANUAL
 Successful SMS reply
Schedule control: function ON/OFF
WorkDay, StartTime-EndTime
3.5.3 Disable timing switching on the output
 Method
The Master user sends following SMS message in order to:
Disable timing switch on the output: #128#0# (20)

Successful SMS reply
Schedule control: function OFF
WorkDay, StartTime-EndTime.
3.6 Auto-control the socket output by temperature
3.6.1 Enable auto-controlled by temperature
 Description
•
The external temperature sensor must be inserted into the I/O port
of TUTA S30. The output status of the socket can be controlled by
the environmental temperature automatically.
•
If users don’t open the “timed switch on the socket” or “delayed
switch on/off the socket” functions, the socket will control to switch
39