TUTA S30 GSM POWER SOCKET USER MANUAL
#18#0# (15)
Successful SMS reply
Control the socket power output status by calling activated /de-
activated.
3.4 Delayed-switch on/off the socket output
Description
•
The output of TUTA S30 can be set to delay switch on or off for a
period with SMS commands.
•
When the “delayed-switch on/off the socket” function is applied, the
preset “timed switch on the output” function will be invalid at once.
•
When the “delayed switch on the socket” command is received and
if the socket output is switched on, the socket output will be
switched off immediately and be switch on again as the setting
delayed time is reaching. Contrarily, if the socket output is switched
off, the output will remain switching off until the setting delayed time
is reaching. Afther switching on the output, the following SMS reply
will be sent:
Status: ON
To Next Page
Loading...