TUTA S30 GSM POWER SOCKET USER MANUAL
Delay control: function OFF
•
When the “delayed switch off the socket” command is received and
if the the socket output is switched on, the socket output will remain
the switch on state and be switched off as the setting delayed time
is reaching. If the socket output is switched off, it will be switched on
immediately and be switch off again when reaching the setting
delayed time. After switching off the socket output, the following
SMS reply will be sent:
Status: OFF
Delay control: function OFF
Method
The Master user sends following SMS message in order to:
Delay switching on the output after a certain minutes:
#138#1# Minutes # (16)
Delay switching off the output after a certain minutes:
#138#0# Minutes # (17)
•
Minutes are time parameters, its range is 0-720,
•
When Minutes is 0, the “delayed switch on/off the socket” function
will be invalid, but the current output status won’t be changed.
Successful SMS reply
To Next Page
Loading...