TUTA S30 GSM POWER SOCKET USER MANUAL
Status: ON
Temp:**
The Master user can enable/disable this SMS notification.
Method
The Master user sends following SMS message in order to set:
SMS notification upon the power supply changing (Default):
#12#1# (32)
No SMS notification upon the power supply changing: #12#0# (33)
Successful SMS reply
(No) SMS notification upon main electricity supply changing.
3.10 “Beep” warning tone
Description
A “Beep” warning tone will be sounded if the work state of TUTA S30
is changed. The “Beep” warning tone is default turning off. The
Master user can enable it by sending SMS command.
Method
The Master user sends following SMS message in order to:
Enable the “Beep” warning tone: #19#1# (34)
Disaable the “Beep” warning tone (Default): #19#0# (35)
To Next Page
Loading...