TUTA S30 GSM POWER SOCKET USER MANUAL
3.6.3 Disable auto-controlled by temperature
Method
The Master user sends following SMS message in order to:
Disable auto-control the output by temperature: #159#0# (23)
Successful SMS reply
Status: ON/OFF
Temp control: function OFF
Temp: **
Mode: Heating/Cooling
Range: LowTemp ~ HighTemp
3.7 Temperature alarm
3.7.1 Over-temperature alarm
Description
A range of temperature can be pre-set onto the socket. In this case,
if the surroundings temperature is detected out of the pre-set
temperature range, the TUTA S30 will auto-send the SMS alarm
message to master’s mobile phone.
This feature depends on the temperature sensor.
To Next Page
Loading...