Tuta S30 - 3.5 Timed switching on the socket output

TUTA S30 GSM POWER SOCKET USER MANUAL
Status: ON/OFF
Output will switch off/on after * minutes.
3.5 Timed switching on the socket output
3.5.1 Enable timing switching on the output
 Description
•
The output of TUTA S30 can be set to switch on for a duration and
then be switch off after the duration.
•
If the socket output status is changed manually (including pressing
M button, sending SMS and making phone call), the preset timing,
delaying or temperature control of the socket will be invalid
automatically, but the setting time range parameters will be saved
until TUTA S30 is reset to factory settings. If these functions need to
be restarted, the following SMS commands must be set: Timing
#128#1#, Temperature control #159#1#, “delayed switch on/off the
socket” commands need to be reset.
 Method
The Master user sends following SMS message in order to:
Enable timing switch on the output: #128#1# (18)
36