Tuta S30 - Page 29

TUTA S30 GSM POWER SOCKET USER MANUAL
•
NewMasterNumber should be the new Master user’s
mobile phone number.
Method 2:
TUTA S30 should be reset to factory settings to remove old
Master number before setting the new one. (Refer to Chapter
3.11)
 Successful SMS reply
New master number set successfully.
Successful SMS reply will be sent to the new Master user. Then
the old Master user’s number will not be able to control TUTA
S30 anymore.
3.1.5 Add a family number
Up to 4 family users’ number can be stored on one socket.
Family users have the authority to send SMS command to switch on or
cut off the TUTA S30 output. The family users should remember and
safeguard the socket’s SIM number.
 Method
The Master user sends following SMS message in order to:
Add a family number:
29