Tuta S30 - Page 32

TUTA S30 GSM POWER SOCKET USER MANUAL
pressing the M button, sending SMS, making phone call), the preset
timing, delaying or temperature control of the socket will be invalid
automatically and a SMS notification message will be sent to the
Master, but the setting time range and temperature range
parameters will be saved until TUTA S30 is reset to factory settings.
3.3.1 Switching on/off by SMS
 Method
The Master user sends following SMS message in order to:
Switch on the socket output manually: #01# (10)
Cut off the socket output manually: #02# (11)
The Family users send following SMS message in order to:
Switch on the socket output manually: #01# Password # (12)
Cut off the socket output manually: #02# Password # (13)
•
Password should be 4 digits password number. Default 1234.
•
SMS reply will be also sent to Master user when Family users use
these two commands to change the socket output successfully.
 Successful SMS reply
Status: ON/OFF
Temp:**
Temp control: function ON/OFF
32