Tuta S30 - Page 41

TUTA S30 GSM POWER SOCKET USER MANUAL
Then TUTA S30 can switch on or off the output automatically
according to the temperature range setting.
3.6.2 Set temperature range to switch on/off the output
 Description
After successful setting of temperature range, the temperature
parameter will be saved on the socket until TUTA S30 is reset to
factory settings.
But the “Auto-controlled by temperature” feature is applied only
when command 20 be set.
 Method
The Master user sends following SMS message in order to:
Set temperature range to switch on/off the output:
#159# Mode # LowTemp # HighTemp # (22)
•
Mode is the control selection:
For coldness, mode=1. For warmness, mode=0.
•
LowTemp and HighTemp means temperature value, the range is
-10 to 50 centigrade degree, if LowTemp equals to HighTemp,
constant temperature control will be actived.
41