To Next PageTo Next Page
Need help?Do you have a question about the Tuttnauer 1730 M and is the answer not in the manual?
General| Model | 1730 M |
|---|---|
| Type | Autoclave |
| Chamber Material | Stainless Steel |
| Chamber Volume | 30 L |
| Temperature Range | 121°C to 134°C |
| Standard Cassettes Capacity | 3 |
Inspect the autoclave for damage upon receipt and document any issues.
Information regarding the manufacturer's warranty on components and assembly.
Procedures for warranty activation and limitations on service coverage.
Overview of the autoclave's design, intended use, and construction.
Guidelines for storing the autoclave safely when not in use.
Specifies environmental conditions for safe and effective autoclave operation.
Lists technical and quality standards the autoclave adheres to.
Lists applicable technical codes and safety standards for the unit.
Lists quality management and medical device standards followed.
Details the materials used in the autoclave's chamber and other parts.
Specifies electrical power and water requirements for the autoclave.
Guidance on proper disposal of wastewater according to local rules.
Data on sound levels and heat transmission from the sterilizer.
Provides physical dimensions for various autoclave models.
Detailed specifications including chamber size, tray dimensions, weight, and volume.
Detailed electrical power, voltage, and heater specifications.
Specifies the maximum load capacity in pounds and kilograms for different models.
Explanation of symbols used in the manual and on the device.
Describes the functions of buttons, indicators, and controls on the control panel.
Details other significant parts and their functions within the autoclave.
Instructions for safe and compliant electrical connection to the unit.
Step-by-step guide for initial unit setup and chamber pitch adjustment.
Instructions for safely moving and transporting the autoclave.
Instructions for safely loading and unloading items into the sterilization chamber.
Procedure for filling the autoclave's water reservoir with distilled water.
Routine maintenance tasks for daily, weekly, and periodic checks.
Daily cleaning and inspection tasks for the autoclave.
Weekly cleaning and descaling procedures for the unit.
Monthly and yearly maintenance tasks for optimal performance.
Step-by-step guide for draining the water reservoir.
Procedure for cleaning the air jet to ensure proper sterilization.
Instructions on how to replace the door gasket for a proper seal.
Monthly procedure for checking the safety valve's functionality.
Steps to clear blockages in the multi-purpose valve or fill piping.
Detailed procedure for using Chamber Brite for autoclave cleaning.
