FHD High Bright Field Monitor 31
7. Other Functions
[6] Focus Assist
• Focus Assist function assigns a color to the
pixels in the shape or the boundary of the
image to inform the user to achive the
best focus.
- With this function, user can easily
dierenciate the focused area from the out-
focused area especially when shooting with
a shallow depth of eld.
- Available types are [Mono] and [Color] types.
*
[Mono] : Background image is mono type.
* [Color] : Background image is original color
type.
[7] Range Error
• Pixels with Y’ or C’ levels exceeding the
designated levels of Y MAX, Y MIN, C MAX
and C MIN shall blink.
- Analyzes the input signal’s Luma(Y’) and
chroma information(C’) and if the input
signal exceeds the designated
minimum value and maximum value, the
pixel shall blink. This
function is to help the user to easily nd out
any unwanted level of signals and for a
better exposure setting.
* In the case of RGB input, Range Error is not
supported.
<Focus Assist ON>
<Focus Assist Mono ON>
<Range Error OFF>
<Range Error ON>
To Next Page
Loading...
Need help?
General
