V 07/07
OptiSelect manual powder gun Maintenance and cleaning • 27
Maintenance and cleaning
Note:
Regular and conscientious maintenance increases the operating life
of the unit and ensures a longer, more constant coating quality!
Daily maintenance
1. Clean the gun, see chapter "Cleaning"
Weekly maintenance
1. Clean the gun, see chapter "Cleaning"
2. Check the grounding connections of the coating booth, the sus-
pension devices of the work pieces, or the conveyor chain
Cleaning
Cleaning the OptiSelect manual powder gun
Frequent cleaning of the gun serves to guarantee the quality of the coat-
ing.
Note:
Before cleaning the powder gun, switch off its control unit. The
compressed air used for cleaning must be free from oil and water!
Daily
1. Blow off the outside of the gun and wipe clean etc.
Weekly
2. Remove powder hose from connector
3. Remove the spray nozzle from the gun and clean it with com-
pressed air
4. Blow through the gun with compressed air, beginning from the
connection in flow direction
To Next Page
Loading...