V 07/07
OptiSelect manual powder gun Spare parts list • 35
Spare parts list
Ordering spare parts
When ordering spare parts for powder coating equipment, please indicate
the following specifications:
- Type and serial number of your powder coating equipment
- Order number, quantity and description of each spare part
Example:
- Type OptiSelect manual powder gun,
Serial number 1234 5678
- Order no. 203 386, 1 piece, Clamp - Ø 18/15 mm
When ordering cable or hose material, the required length must also be
given. The spare part numbers of this yard/meter ware is always marked
with an *.
The wear parts are always marked with a #.
All dimensions of plastic hoses are specified with the external and inter-
nal diameter:
Example:
Ø 8/6 mm, 8 mm outside diameter (o/d) / 6 mm inside diameter (i/d)
WARNING!
Only original ITW-Gema spare parts should be used, because the
hazardous location approval will be preserved that way! The use of
spare parts from other manufacturers will invalidate the ITW Gema
guarantee conditions!
To Next Page
Loading...