4
Safety Measures
Kindly adhere to the provided instructions, as any misuse carries inherent risks.
1. Refrain from gazing directly at the laser to avert potential eye damage.
2. Avoid direct contact while the machine is operational.
3. To shield your table from burns, consider placing a metal plate under the engraved or cut
object.
4. Steer clear of flammable substances or gases.
5. Keep the device out of reach of children and pregnant individuals.
6. Refrain from disassembling the laser unit without proper guidance.
7. Refrain from employing the laser on materials that can reflect light.
8. Don protective goggles when removing the laser cover.
9. Power off the device when not in use.
Safety Instructions
Caution: The laser engraving machine must not be used to directly engrave or cut materials
that reflect light, as this could result in harm.
This product is designed for fast engraving and is not suitable for industrial cutting.
Additionally, note that the laser head is a consumable item.
Avoid direct contact with the laser head using your hands. It's recommended to wear
protective goggles.
Exercise care to prevent static damage to the laser diode, as it's a delicate component. (While
this product features electrostatic protection design, there remains a slight risk of damage.)
To Next Page
Loading...
