3.3.1 Trusted Computing (TPM 1.2 Security Device)
Security Device Support
Enable or disables BIOS support for security device. O.S. will not show Security
device. TCG EFI protocol and INT1A interface will not be available.
Enabled / Disabled
NOTE: Security Device Support Default is [Disabled]
TPM State
Enable/Disable Security Device.
NOTE: Your Computer will reboot during restart in order to change State of the
Device.
Enabled / Disabled
Pending operation
Schedule an operation for the security device.
NOTE: Your Computer will reboot during restart in order to change state of Security
Device.
None / TPM Clear
To Next Page
Loading...
