TYAN S7025 - Page 64

http://www.tyan.com
64
Feature Option Description
Boot Settings Configuration
Enabled
Quick Boot
Disabled
This option allows user bypass
BIOS self test during POST.
Disabled
Quiet Boot
Enabled
Disabled: displays normal POST
messages.
Enabled: displays OEM log instead
of POST messages.
Force BIOS
AddOn ROM Display
Mode
Keep Current
Allows user to force BIOS/Option
ROM of add-on cards to be
displayed during quiet boot.
On
Boot up Num-Lock
Off
Selects Power-on state for
Numlock.
Enabled
Wait for ‘F1’ If Error
Disabled
Waits for F1 key to be present if
error occurs.
Enabled
Hit ‘DEL’ Message
Display
Disabled
Displays “Press DEL to run Setup”
in POST.
Disabled
Interrupt 19 Capture
Enabled
Enabled: allows option ROMs to
trap interrupt 19.
Boots Graphic
Adapter Priority
_
Select which graphics controller
to use as the primary boot
device.
Enabled
Onboard VGA device
Disabled
Enable/Disable onboard VGA
chip. Note: Do not disable
if you have not other
VGA card attachment.
Enabled
IPMI Support
Disabled
Disable /enable IPMI function