http://www.tyan.com
112
3.6.1 System Event Log
SEL Components
Change this to enable or disable all features of System Event Logging during boot.
Disabled / Enabled
NOTE: When SEL Components is set to [Disabled], the following items are read
only.
Erase SEL
Choose options for erasing SEL.
No / Yes, on next reset / Yes, on every reset
When SEL is Full
Choose options for reactions to a full SEL.
Do Nothing / Erase Immediately / Delete Oldest Record
Log EFI Status Codes
Disable the logging of EFI Status Codes or log only error code or only progress
code or both.
Disabled / Both / Error Code / Progress Code
To Next Page
Loading...
