TYAN S8036 - Page 106

http://www.tyan.com
106
3.6.1 System Event Log Submenu
SEL Components
Change this to enable or disable all features of System Event Logging during boot.
Enabled / Disabled
Erase SEL
Choose options for erasing SEL.
No / Yes, on next reset / No, on every reset
When SEL is Full
Choose options for reactions to a full SEL.
Do Nothing / Erase Immediately / Delete Oldest Record
Log EFI Status Codes
Disable the logging of EFI Status Codes or log only error code or only progress
code or both.
Both / Disabled / Error Code / Progress Code