TYAN S8036 - Page 108

http://www.tyan.com
108
Configure IPV4 support
Management Port 1
Configuration Address Source
Select the configure LAN channel parameters statically or dynamically (by BIOS or
BMC). Unspecified option will not modify any BMC network parameters during BIOS
phase.
Unspecified / Static / DynamicBmcDhcp / DynamicBmcNonDhcp
Management Port 2
Enable/Disable BMC Share NIC
Disabled / Enabled
Configure IPV6 support
Management Port 1
IPV6 Support
Enable or Disable LAN1 IPV6 Support
Disabled / Enabled
Management Port 2
IPV6 Support
Enable or Disable LAN2 IPV6 Support
Disabled / Enabled