TYAN S8036 - Page 92

http://www.tyan.com
92
Custom Pstate2
Disable – disable this Pstate
Custom – customize this Pstate. applicable only if Pcd0cDisable = FALSE
WARNING – DAMAGE CAUSED BY USE OF YOUR AMD PROCESSOR
OUTSIDE OF SPECIFICATION OR IN EXCESS OF FACTORY SETTINGS ARE
NOT COVERED UNDER YOUR AMD PRODUCT WARRANTY AND MAY NOT BE
COVERD BY YOUR SYSTEM
Custom / Auto
3.5.1.1.2 CCD/Core/ Thread Enablement Submenu
CCD Control
Sets the number of CCDs to be used. Once this option has been used to remove
any CCDs, a POWER CYCLE is required in order for future selections to take effect.
Auto / 2 CCDs / 3 CCDs / 4 CCDs / 6 CCDs
Core control
Sets the number of CCDs to be used. Once this option has been used to remove
any CCDs, a POWER CYCLE is required in order for future selections to take effect.
Auto / TWO (1 + 1) / FOUR (2 + 2) /SIX (3 + 3)