Tyco AutoPulse Z-20 User Manual

12
AUTOPULSE Z-20 Agent Releasing Panel Operator’s Manual (579-1165AR)
Viewing the Supervisory and
Trouble Conditions Details:
Each Supervisory or Trouble condition contains detailed information on the point, or
points, that have triggered it. To access that info, complete the following steps (Trouble
screen is shown as an example):
1. Tap a desired Trouble condition from the Trouble in System screen. The Trouble condition can either be a point or a
zone containing a variety of points. A point in Trouble state is shown as an example.
2. Take the necessary actions, using the buttons available at the point details screen. A Time and Date Trouble is used
as an example.
Fire Alarm in System
Date
Time
First of 1
Date
PULL STATION 1
FIRE ALARM
ACK
1
Alarm Functions Menu
P58
SYSTEM TIME/DATE WAS NOT SET
Date
Time
On
Off
Time /Date
Trouble Details
Auto
Supervisory and Trouble Conditions, Continued

Tyco AutoPulse Z-20 Specifications

General

Brand	Tyco
Model	AutoPulse Z-20
Category	Control Panel
Language	English