EasyManua.ls Logo

Tycon Power Systems TP3000WC - ProWeatherStation Setup

Tycon Power Systems TP3000WC
73 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8000060 Rev 3 19-Feb-19 TyconSystems.com
5
one month, one-year, total rain and rainfall event.
Wind speed in mph, km/h, m/s, knots or Beaufort
Wind direction with 360 degrees
Wind chill, dew point, and heat index temperature display.
Barometric, weather forecast.
MAX, MIN value with time stamp. High/ low alarm.
Light and UV index
Non-Volatile Memory: Saves the data when batteries are changed
WeatherSmart Wi-Fi PC software
Uploads the data to 3 weather servers: wunderground.com,
Weathercloud, and WeatherObservationsWebsite (WOW)
ProWeatherStation Setup
Warning: Any metal object may attract a lightning strike,
including your weather station mounting pole. Never install the
weather station during a storm.
Warning: Installing your weather station in a high location may
result in injury or death. Perform as much of the initial checkout and
assembly on the ground, preferably inside a building or home. Only
install the weather station on a clear, dry day.
Note:
Before placing and installing all components of the weather station at
their destination, please set up the display console(receiver) and outdoor
sensor(transmitter) in a room and get familiar with the functions.
Power up sequence must be performed in the following order: Insert
batteries in the Outdoor Sensor Array first; Display Console second).
Attention:
Do not mix old and new batteries
Do not use Rechargeable batteries.
Use Lithium batteries for sensor array when the outdoor temperature
is lower than 0 degrees Celsius