Tycon Power Systems TP3000WC - Setting Mode

8000060 Rev 3 19-Feb-19 TyconSystems.com
21
b) Max rain rate since the last reset
c) Max Rainfall data of current day
d) Max Rainfall data of last week
e) Max Rainfall data of last month
f) Max Rainfall data of last year
2. Setting Mode
2.1 In normal mode, press SET key for 2 seconds to enter the setting
mode.
Then press” ”button to transfer among different setting function:
TIME SETTING
UNIT SETTING
RECORD SAVE INTERVAL
RAIN SEASON SETTING
BAROMETRIC SETTING
KEY BEEP SETTING
CALIBRATION SETTING
TRANSMITTER ID
When the desired setting function is displayed, press the” ” key to start
the associated setting menu. Change a setting with the key /
.Hold the / key for 2 seconds will increase/decrease digits in
great steps. Press HISTORY key or wait for 30 seconds at any time, the
device will return to normal mode.
⚫ TIME SETTING
After entering setting mode, the first setting function “TIME
SETTING” will appear on the message board. Use the” ” key to
select the desired sub-functions:
a) TIME FORMAT:12H/24H
b) DATE FORMAT:MM-DD-YYYY / DD-MM-YYYY / YYYY-MM-DD
select