c) TIME: Manual setting of time and date
d) TIME ZONE
e) DAYLIGHT SAVING TIME: switch on/off the reception of DST.
f) NORTH/SOUTH: Set northern/southern hemisphere for moon
phase
⚫ UNIT SETTING
After entering setting mode, the first setting function” TIME
SETTING” will appear on the message board. Press” ”key to
switch to “UNIT SETTING” display.
Then use the” ” key to select the desired sub-functions:
a) Light unit select (lux, fc, w/m2)
b) Temperature unit select (C, F)
c) Pressure unit select (hpa, inhg, mmhg)
d) Wind speed unit select (km/h, mph, knots, m/s, bft)
e) Rainfall unit select (mm, inch)
⚫ RECORD SAVE INTERVAL: to set the interval of data recording.
Under setting mode, the first setting function appearing on the
message board is” TIME SETTING”, Press” ”key repeatedly to
switch to “RECORD SAVE INTERVAL” display.
Use the” ” key to start setting of recording interval.
Use the / keys to select the desired recording interval for
measured values.
⚫ RAIN SEASON SETTING
Under setting mode, the first setting function appearing on the
message board is” TIME SETTING”. Press” ”button repeatedly to
switch to “RAIN SEASON SETTING” display.
Press the” ” button to start setting of the month of rain season.
Press the / buttons to select the month from January to
December.
Rain season is the time of year when most of a region’s average
To Next Page
Loading...