annual rainfall occurs. Rain season influences the annual rainfall
maximum, minimum and total value. The annual rainfall and annual
max/min rainfall resets at 12:00 AM of the first day of the selected
month.
⚫ PRESSURE SETTING
Under setting mode, the first setting function appearing on the
message board is” TIME SETTING”. Press the” ”button repeatedly
to switch to “BAROMETRIC SETTING” display.
Then press the” ” button to select the desired sub-functions:
BAROMETRIC COORDINATES: Press / buttons to change
the historical graph time between 12 and 24 hours.
⚫ KEY BEEP SETTING
Under setting mode, the first setting function appearing on the
message board is” TIME SETTING”. Press” ”button repeatedly to
switch to “KEY BEEP SETTING” display.
Use the” ” button to start setting button beep.
Press / buttons to switch on/off the button beep.
⚫ Calibration setting
a) IN TEMP OFFSET
Offset for indoor temperature.
b) IN HUMI OFFSET
Offset for indoor humidity.
c) OUT TEMP OFFSET
Offset for outdoor temperature.
d) OUT HUMI OFFSET
Offset for outdoor humidity
e) ABS PRESS OFFSET
Offset for absolute barometric pressure.
f) REL PRESS OFFSET
Offset for relative barometric pressure.
To Next Page
Loading...