Tycon Power Systems TP3000WC - Page 70

8000060 Rev 3 19-Feb-19 TyconSystems.com
70
Problem
Solution
2. Confirm your station ID is correct. The
station ID is all caps, and the most
common issue is substituting an O for a
0 (or vice versa). Example,
KAZPHOEN11, not KAZPH0EN11
3. Make sure the date and time are correct
on the console. If incorrect, you may be
reporting old data, not real-time data.
4. Make sure your time zone is set
properly. If incorrect, you may be
reporting old data, not real-time data.
5. Check your router firewall settings. The
console sends data via Port 80.
No Wi-Fi connection
1. Check for Wi-Fi symbol on the display.
If wireless connectivity is successful,
the Wi-Fi icon will be displayed
in the time field.
2. Make sure your modem Wi-Fi settings
are correct (network name, and
password).
3. Make sure the console is plugged into
AC power. The console will not connect
to Wi-Fi when powered by batteries
only.