Tylo STEAM HOME - Dimensional Information

23
Manual descaling must be performed regularly in accordance
with the following table.
Operating time in hours before descaling.
kW
Tylö
Solvent
(number
of bags)
Sulphamic
(grams)
Tylö liquid
descaling
agent (ml)
Operating hours at different water
hardnesses (dH)
0.01-1°dH 1-4°dH
3 2 100 250 300 100
6-9 2 100 250* 200 90
12-15 4 200 500 150 84
*
250ml for home
500ml for commercial
The need for manual descaling depends on water quality, the
power of the steam generator and the operating time. In
order to test the degree of hardness, follow the
accompanying EASY TEST instructions and then comply
with the recommendations in accordance with
Limescale is the most prevalent cause of operational
breakdown. It is therefore important to comply with the
descaling intervals in the care and maintenance instructions.
With normal private use, there is very little need for descaling
unless the water is very hard. Nevertheless, the steam
generator should be descaled at least twice a year. This
releases limescale and other deposits that have become
attached to the tank walls and heating element.
Instructions for descaling the Tylö Steam generator:
• Switch on the steam generator and leave it running until
the water in the tank begins to boil.
• Switch off the steam generator at the control panel and
wait about 5 minutes.
• Slacken the lock nut on the 3-way connection at the top
of the steam generator. Use a funnel to pour the
descaling agent into the tank via the 3-way connection.
• Screw the lock nut on the 3-way connection into place
and allow time for the descaling agent to work.
• After about 1 hour, the steam generator will
automatically empty and flush the tank clean, and is
then ready for use again.
If you want the descaling to work for a longer time, use the
power switch to switch off the steam generator. The steam
generator will empty out as soon as the power is switched
back on.
If there is a large amount of limescale in the steam
generator, it will be necessary to perform descaling several
times repeatedly, followed by flushing each time.
Tylö Solvent Descaler is non-toxic, odor-free and causes no
damage to the steam generator or its components.
Dimensional information
Tylö Steam Generator Home type, dimensions in millimeters
Fig. 6
Tylö Steam Generator Commercial type, dimensions in
millimeters
Fig. 7
Correct power rating, related to room volume:
kW
Steam room volume min./max. m³
Steam
prod.
kg/h
Toughened glass lightweight
wall. Impression, Panacea,
etc.
Tiled, concrete, stone, etc.
heavyweight wall.
with
ventilation
without
ventilation
with
ventilation
without
ventilation
3
–
max. 3
–
max. 2
3,5
6
3 – 8
4 – 15
2 – 5
2.5 – 8
8
9
6 – 16
13 – 24
4 – 10
7 – 16
12
12
14 – 22
22 – 30
8 – 15
14 – 20
16
15
18 – 25
28 – 38
10 – 19
18 – 25
20
!
Note!
The steam room must NOT be used during
descaling!