We try our best to preserve the environment and are always concerned about our environmental impact
at each step of planning, development, production, distribution, use and disposal of products, and for
our overall operations through an “environmentally friendly” management system. We comply with inter-
national environmental regulations, environmental regulations designated by country and local authori-
ties and other requirements with which we are in agreement, and we work towards the prevention of envi-
ronmental pollution and the conservation of resources. We provide environmental education and have an
awareness campaign to raise environmental awareness among all our employees and members of the sup-
porting companies.
We introduce the “Use and Disposal” policy concerned with environment preservation as follows.
1. Please read the operator’s manual thoroughly for global environment protection. Overload on the machine shortens the
product life and increases the harmful exhaust gas, which causes air pollution due to the incomplete combustion.
2. When replacing various uids (for engine, transmission, hydraulics, etc.) by yourself, don’t dispose the used oil to any-
where not recommended. It can pollute the ground and water. Please contact your local dealer to dispose it legally.
3. Observe the operator’s manual and store or dispose the waste product properly. Rust, oil, etc. leaked from waste prod-
uct improperly stored can pollute the ground and water. Accordingly for a waste product disposal, contact the necessarily
“approved waste collection and recycling facility” to discard the used materials legally.
To Next Page
Loading...
