TYM 2400 - To Stop the Engine; To Raise or Lower the Implement

 


Move the position control lever forward
or backward to lower or raise the imple-
ment.
1. Put the throttle lever on LOW, and turn
the main switch to “OFF”.
2. Put shuttle lever, main gearshift le-
ver and PTO shift lever to “N”. put PTO
ON/OFF switch in to the “OFF” posi-
tion and front wheel lever to the “OFF”.
3. Put the position control lever on
“DOWN”























BR00O508A







 
BR00O509A
1
A B