EasyManua.ls Logo

TYM 2400 - Battery Charge Lamp; Engine Oil Pressure Lamp; Fuel Gauge

TYM 2400
142 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...

4
  
It will be turned on when the key switch
is put into the “ON” position, and will be
turned o󽗈 when the battery
starts being charged after engine is start-
ed and the engine revolution increas-
es. The battery will not be charged with
the engine below 1,000 rpm. (The rpm
should be 1,500 rpm or higher)
 
1 1

Lamp will come on when the ignition
switch is put into the “ON” position.It will
turn o󽗈 when the engine is started.
If this lamp comes on while the engine is
running, it indicates a problem in the en-
gine oil system. Stop the engine immedi-
ately and check for problems.
 
1
1

   
 
 
The needle indicates the quantity of fuel
remaining in the tank. If the needle is in
the red zone, re󽗉ll immediately.

11

Table of Contents

Related product manuals