TYM 2400 - Front Axle; Front Axle Fliud


7

Drain the fluid through the drain holes
under the rear axle case and rear axle
housing. Supply the 󽗊 uid through the 󽗉 ll-
er hole behind the hydraulic case.
1. Transmission oil can be used for the
hydraulic system and for the power
steering unit.
2. Make sure to the genuine  trans-
mission 󽗊 uid.
BR00O705A








Open the fluid filler cap on the up-
per right side of the front axle, clean
the tip of the gauge, dip the cap with-
out screwing in, and take it out again
to read the 󽗊 uid level. Re󽗉 ll the 󽗊 uid as
necessary, and also check for leaks.
BR00O706A

1 1
1