5
BR00O515A BR00O516A
3. There are 2 holes in top link mount-
ing bracket.
※ Top link needs to be moved from (A)
to (B) as followed.
If rear side of implement is too high.
4. Level a 3 point mounted implement
from side to side by turning the ad-
justing handle to shorten or length-
en the adjustable lifting rod with
the implement on the ground.
1. When engaging or disengaging the
implement by moving the tractor,
make sure that no one is allowed
around the tractor or between the
implement and the tractor.
2. Engage or disengage the imple-
ment on a at and safe place. Sup-
ply proper lighting at all times and
especially at night.
3. When engaging a heavy implement,
load the weight on the front to keep
the balance of the tractor.
4. When adjusting the implement, ap-
ply the parking brake, switch o the
engine, and confirm that the PTO
lever is on the “N” position.
5. When towing something, make sure
to use the drawbar.
6. Increase the wheel tread on a slope
or when towing.
A
B
C
To Next Page
Loading...
