BR00O708A
Replace it every 300 hours or when engine
oil is changed.
1. After draining the engine oil, turn
the cartridge to the left with the filter
wrench.
2. Apply a thin lm of oil over the rubber
ring on the bottom of the new cartridge
and attach the new lter securely.
3. After changing the engine oil, start the
engine and run it until the engine oil
pressure warning lamp is turned o .
4. After the oil pressure warning lamp is
turned off, check the oil level again.
Add oil as necessary.
Drain the fluid through three drain holes
under the front axle.
Re ll the uid from the upper right side of
the front axle
BR00O707A
1
1
To Next Page
Loading...
