7
The lter is a cartridge type.
BR00O709A
1. After draining the transmission fluid,
turn the cartridge to the left to take it
out.
2. Apply a thin lm of uid over the rub-
ber ring on the bottom of the new car-
tridge and attach the new lter secure-
ly.
3. After changing the transmission flu-
id, start the engine to circulate the u-
id and then stop the engine. Check the
uid level at dipstick on left axle hous-
ing and add uid as necessary.
Cleaning and replacement of fuel lter el-
ement
1. Put the fuel cock to “B” position
2. Take out the filter and remove water
and dust inside the lter.
3. After cleaning the lter, replace it and
put the fuel cock to “A” position. Re-
move the air.
4. Replace the lter element.
1
1
B
A
To Next Page
Loading...
