7
• In this case, the free play of the brake
pedal is 1.2~1.5 in (30~40 ㎜ ).
• Adjust both of the brake pedals.
BR00O728A
Open the engine hood and press the
middle of fan belt with finger to see
if the belt sags about 0.4~0.6 in or if
there is any damage to the belt. If the
sagging is not correct, loosen the gen-
erator bolt and move the generator to
adjust the tension of the fan belt. If the
fan belt still slips after the generator is
moved to the maximum, replace the
belt with a new one. New belts must
be inspected after 50 hours of use.
1
1
2
1
To Next Page
Loading...
