5
LXN5O401A
BR00O505A
BR00O506A
BR00O507A
11
4. Put the acceleration lever to Min a
turn ignition switch to “ON” posi-
tion.
5. After the pre-heat lamp has turned
off, depress the clutch pedal ful-
ly and turn the ignition switch to
START.
6. Once the engine has started, take
your hand o the ignition switch.
7. Increase the engine to about 1,500
rpm and warm it up for about five
minutes without a load.
1
B
A
1
To Next Page
Loading...
