EasyManua.ls Logo

TYM BT400 - Transport Lock Operation

TYM BT400
53 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BACKHOE OPERATION
Swing Lock and Boom Lock
Swing Lock and Boom LockSwing Lock and Boom Lock
Swing Lock and Boom Lock
When transporting or dismounting backhoe, you must lock the backhoe's swing and boom.
Observe the following safety warnings when working with your new backhoe/tractor.
CAUTION:
CAUTION: CAUTION:
CAUTION:
When using a backhoe, be aware of bucket and boom location at all times.
Position boom straight back and drop pin through holes in swing frame and boom. When not in
use, store pin in hole provided on swing frame and boom.
When
raising
a
arm(dipperstick)
with
bucket
rolled
forward,
material
can
spill
onto
non
- 15 -
CAUTION:
CAUTION: CAUTION:
CAUTION:
CAUTION:
CAUTION: CAUTION:
CAUTION:
CAUTION:
CAUTION: CAUTION:
CAUTION:
To help prevent roll-over, adjust the rear wheels to their widest setting to maximize
stability. Refer to your Tractor Operator's Manual for recommendations.
Operate from backhoe operators seat only. Pay attention, be ready to stop, immediately
in case of an emergency.
Do not dig near stabilizers. Ground under stabilizers could collapse. Make all movements
slow and gradual when practicing operation.
When
raising
a
arm(dipperstick)
with
bucket
rolled
forward,
material
can
spill
onto
non
target area causing injury to assistant or damage other objects.
- 15 -