7
CHARGING THE JUMP STARTER:
At home:
USB-A to USB-C Cable (included), USB-C to USB-C
Cable (not included)
1. Plug one end of the USB-C Charging Cable into a USB-A
/ USB-C port on a 18W (or above) wall adapter
(not included).
2. Connect the other end to the USB-C Charging Input Port on
the Jump Starter.
3. Disconnect the Jump Starter when it is fully charged.
Store the Jump Starter in a safe place when not in use.
NOTE: In order to reduce the risk of re or electric shock, use an adapter that is suitable for the
application and certied as a Class 2 or LPS power supply or power adapter.
In Car:
1. Connect the USB-A of the Charging Cable (included) to the 12V Car
Charger (included) then to the 12V socket in vehicle.
2. Plug the other end into the USB-C port of the Jump Starter.
3. Disconnect the Jump Starter when it is fully charged. Store the Jump Starter in a
safe place when not in use.
NOTE: Fully charge the Jump Starter before rst use. To preserve the battery life and performance, check the
battery status regularly, charge when needed. Recharge every 2-3 months if Jump Starter is not being used.
USB-C
USB-C
USB-A
USB-A
USB-C
To Next Page
Loading...
