u-blox UBX-G7020 - Page 31

UBX-G7020 - Hardware Integration Manual
Design-in
GPS.G7-HW-10003 Objective Specification Page 31 of 74
For more information about time aiding or TimeMark see the u-blox 7 Receiver Description including Protocol
Specification [3].
For Power Save Mode operations where the RTC is needed the time aiding cannot be used. Because the
host does not have any information when the UBX-G7020 turns from OFF status to ON status during
ON/OFF operation of Power Save Mode.
Confidential