UBX-G7020 - Hardware Integration Manual
Design-in Checklists
GPS.G7-HW-10003 Objective Specification Page 56 of 74
4 Design-in Checklists
This section summarizes the most important items for a simple design check. The Layout Design-In Checklist also
helps to avoid an unnecessary re-spin of the PCB and helps to achieve the best possible performance. Basically
the checklist lists the recommendation from the previous sections.
It is highly recommended to follow the Design-In Checklist when developing any u-blox 7 GPS/GNSS
applications. This can significantly reduce development time and costs.
To Next Page
Loading...
