13 of 62 0319 IH-1679
FUNCTION SUB-FUNCTION DESCRIPTION DEFAULT VALUE
F1 u nt Sets the displayed weight unit. Select kg/lb. kg/lb
F2 dat Scale will show y-n-d or d-n-y at first, this is date format (year-
month-date or date-month-year). Then you need set year,
month and date.
2000/01/01
00:00
yy Set year: The display will show current year or 2000.
Enter new year.
mmdd Set date: The display will show current date or 01.01,
enter new date, format mm.dd (month/date).
hhmm Set time: The display will show current time or 00.00.
Enter new time, format hh.mm (hour/minute).
F3 off CLOCK Set clock off or on.
Off: Don't use clock function.
On: Clock display after scale is on standby for
5 minutes.
CLK off
Bk Set the backlight.
On: Always on.
Auto: Press a key and weight is more than 20d,
backlight comes on automatically.
Off: Always off.
Auto
Off Set auto power off.
0: Don't use auto power off function.
3: Auto power off after standby 3 minutes.
5: Auto power off after standby 5 minutes.
15: Auto power off after standby 15 minutes.
30: Auto power off after standby 30 minutes.
of 0
FUNCTION SETTING TABLE
OPERATION CONTINUED
To Next Page
Loading...
