UAZ 3303 - Appendix 2: Torques for Main Threaded Connections

102
Appendix 2
TORQUES FOR MAIN THREADED CONNECTIONS,
kgfm
Stud nuts attaching cylinder block
heads to cylinder block 9.0-9.4
Connecting rod bolt nuts 6.8-7.5
Crankshaft main bearing cap attachment nuts 12.5-13.6
Bolt nuts attaching flywheel to crankshaft 7.6-8.3
Bolt nuts attaching flanges to propeller
shaft 3.2-4.0
Nuts attaching flange to axle pinion 16-22
Bolts attaching final drive gear
to differential case 10-14
Spring U-bolt nuts 9.0-10
Wheel attaching nuts 10.5-12
Bolts attaching front axle driving flanges
and rear axle axle shafts 6.0-7.0
Nut attaching steering arm to shaft 20-28
Steering rod ball pin nuts 6.0-8.0
Steering rod locknuts 10.5-13.0
Ball support attachment bolts 3.6-5.0
Wheel hub bearing locknuts 5.0-7.0
Anchor plate bolts:
front 3.6-4.4
rear 4.4-5.6
Note. For other threaded connections, the torque should be equal to:
Ì6 - (0.45-1.0);
Ì8 - (1.4-1.8);
Ì10 - (3.0-3.5) kgfm.