EasyManua.ls Logo

UAZ 3303 - Body Maintenance

UAZ 3303
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
87
it to drop below a value of 20 mm above the reservoir bottom
in order to avoid failure of the washer pump.
Never keep the washer switched on in excess of 10 s.
Maintenance of the Body
To take care of external appearance of the automobile,
maintain regularly the varnish coating of the body. Do not wipe
dust and dirt with a dry cloth. Wash the body with water jet of
low head using soft rags. Upon washing, wipe the body surfaces
dry. Do not use soda or alcaline solutions because the varnish
coating could be become dull. Avoid exposing the automobile
to sunlight for a long time. Never spill acids, solutions, soda,
brake fluids, fuel and antifreezing agents on the painted surface
of the body and rubber parts.
To take care of the body coatings, use prophylactic polishing
liquids.
Fig. 76. Electric washer:
1 -pump body complete with electric motor; 2 -ground wire; 3 -wire "+"; 4 -
reservoir; 5 -combined switch; 6 -cover; 7, 9 -hoses; 8 -tee-piece; 10 -jet; 11 -
jet ball; 12 -gasket; 13 -clamp

Table of Contents

Related product manuals