52
Fig. 40. Clutch control linkage with
pressure springs and release levers:
a - fluid level
1 -reservoir; 2 -master cylinder; 3, 4 -
pipelines; 5 -pedal; 6 -hydraulic hose;
7 -protective cap; 8 -by-pass valve; 9 -
slave cylinder; 10 -locknut; 11 -spring
(is not installed to couple with centre
diaphragm pressure spring); 12 -pushrod;
13 -fork; 14 -coupling
Fig. 41. Gearbox plugs:
1 -filler hole plug;
2 -drain hole plug
Fig. 42. Gearbox control linkage:
1 -gearshift lever; 2 -gearshift lever boot;
3 -selector lever; 4 -shift lever; 5 -
vertical shift rod; 6 -intermediate shift
lever; 7 -intermediate selector lever; 8 -
horizontal selector rod; 9 -shift lever;
10 -selector le-
ver; 11 -horizon-
tal shift rod; 12 -
intermediate
bracket of levers;
13 -intermediate
selector lever;
14 -vertical se-
lector rod; 15 -
grease fitting
To Next Page
Loading...
