Ubee Interactive Using the UPS Option
Ubee DVW32CB Advanced Wireless Voice Gateway Subscriber User Guide • January 2015 99
11.2 Using the UPS Option
The UPS option displays information about the uninterrupted power supply.
To view UPS information:
1. Click UPS from the left side menu. Field descriptions are listed below the screen
example.
Label Description
Battery Charge Module Software
Driver Describes the driver used in the software.
Built Indicates the date and time the battery was manufactured.
Battery Status
Current Power Source Displays the power source for the device, such as Utility
through the power cord or internal battery power.
Charger State Displays the status of the battery, such as Sleep or Idle.
Number of Batteries Indicates the number of batteries in the device.
Input Voltage Displays the input voltage in millivolts (mV).
Temperature Displays the battery temperature in Celsius.
Estimated Time Remaining Displays how much time is left on the battery in minutes.
To Next Page
Loading...
