Ubee Interactive Using the User Default Option
Ubee DVW32CB Advanced Wireless Voice Gateway Subscriber User Guide • January 2015 30
4.6 Using the User Default Option
The User Default option allows you to restore the DVW32CB to the factory default
values.
To restore factory defaults:
1. Click Status from the main menu.
2. Click User Default from the left side menu. Field descriptions are listed below the
screen example.
Label Description
Restore User Defaults Restores settings to factory defaults. Select Yes to restore the
device to default settings for the firewall and content filter
settings. This operation does not require a reset of the system.
Reset The System Resets the system. Select Yes to power cycle the device.
Apply Applies the options selected on this screen.
To Next Page
Loading...
