Ubee Interactive Using the Port Filtering Option
Ubee DVW32CB Advanced Wireless Voice Gateway Subscriber User Guide • January 2015 51
3. Click MAC Filtering from the left side menu.
4. Enter the MAC address to block in the text box to the left of the Add MAC Address
button.
5. Click the Add MAC Address button. The MAC address is displayed in the filtered
MAC address list. Field descriptions are listed below the screen example.
6.4 Using the Port Filtering Option
Use the Port Filtering option to configure port filters to block to all devices on the LAN
Internet services that use the ports specified.
To configure port filters:
1. Click Advanced from the main menu.
Label Description
MAC Addresses Specifies the MAC address to block. Enter the MAC address
in the field.
Add MAC Address Adds a MAC address to the list of addresses to block.
Addresses entered: n/20 Displays the MAC addresses to be blocked. The number of
MAC addresses entered is shown as 1/20 where 1 is the
number of addresses in the list. You can filter up to twenty
MAC addresses at one time.
Remove MAC Address Deletes the selected MAC address from the list of addresses
to be blocked.
Clear All Removes all MAC addresses from the list.
To Next Page
Loading...
